Recent content by CogitoErgoLevo

Actually aero mode is only 1/2 inch lower than normal mode.

What happens exactly to your truck if voltage drops below 12.6? Does it stall? Do you get warnings/errors on dash? My truck battery voltage behaves pretty much the same as yours but i have absolutely no issues with the truck. If I run AC and other electrical things on a long highway trip the...

i have only slight rubbing in entry/exit mode. All other modes are fine. If you don't have air suspension then you will not have any rubbing

Installed the front and transfer case skid plates. That was super easy. Total was $200 with tax and shipping. I ordered the bolts from Amazon ($10 for 8 bolts) M10 x 35mm Flanged Hex Head Bolts Flange Hexagon Screws

The guy from Truck Central on YT. He has over 250k miles on his 2019 limited

Can you post the instructions they sent you? Just curious and also in case it happens to me too

That is the trade off I believe. I went from middle hole to inner one (7709) and the ride feels bumpier in general but it feels better when turning. And it's great at highway speeds. Maybe upgrading the rear dampeners would help?

That file is not really a file but a package containing multiple files that is why the single file size limit does not apply to this instance. It is treated like a folder/directory

No idea. Regarding transfer case fluid. When i drained it, i got about 1.5 quarts out. I refilled 2 quarts. It looks like it was low, maybe under-filled from factory? I had been having intermittent issues switching between 2wd, 4wd auto, 4wd high. It was very slow at switching. Used to blink 3-4...

Replaced front and rear differential fluids along with transfer case fluid. I used Mopar fluids as per manual. At 35k miles, it was not necessary but since I have a cross country trip over summer (7k miles round trip) I figured now would be a good time to do that.

Nice truck, tires look great!! Technically, going from 275/55/20 to 285/60/20 your speedo should be off by about 3.5 mph at 75mph. Here is a link that shows it: https://www.tacomaworld.com/tirecalc?tires=275-55r20-285-60r20

Is there a difference between the new manifold and the old (cracked) one? Like new one is thicker...?

How long did it take them to self calibrate? Mine are still 2-3psi higher after 5 days of driving

Try this: roll down front windows, then fold the mirrors. Roll up windows slowly and see if they touch the mirrors

On my truck It looks like they do, but if you look closely they don't. It is very close but they don't touch