5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Richard320's latest activity
-
Richard320 replied to the thread Uca torque specs .Here ya go. -
Richard320 replied to the thread 2022 Ram A/C Recirculation Noise.I think that's normal. When I switch to recirculate, it gets louder. It also seems to blow harder out the vents.
-
Richard320 replied to the thread Wheel weights.They have to strip off the old weights before they can balance the new tires. I'm sure they'd be happy to scrub the residue off the...
-
Richard320 replied to the thread Fuel Range is way off.That distance is based on the average mpg for a very short recent distance and the amount of fuel left. It doesn't matter if you zero...
-
Richard320 replied to the thread Tune to pull a camper.You'll probably get better responses over at Homepage - HD Rams. This is mostly about the 1500 DT pickups.
-
Richard320 replied to the thread Forum down?.I thought that, too.
-
Richard320 replied to the thread AC has a foul smell..Yep, check cabin filter first. And see if things are wet. You can also set things up to blow in recirculate with the filter out and...
-
Richard320 replied to the thread Safety issue, need help.Any one of your modules could be failing and shorting out the CAN BUS. That's the network that ties everything together, engine, trans...
-
Richard320 replied to the thread Normal voltage?.For eTorque, yes. Voltage on the 12v system is wacky. There are numerous threads about it.
-
Richard320 replied to the thread Seat Covers.These still look good. Actually, they look better now than they did in these pictures. They've smoothed out. Carhartt Seat Covers
-
Richard320 replied to the thread 2021 Hemi bouncing rpms when placed in drive.Try cleaning the throttle body. As oil vapors and such build up on the throttle plate, it restricts air flow. The computer adjusts to...
-
Richard320 replied to the thread Glovebox conversion part #.2500s and up are over at Homepage - HD Rams
-
Richard320 replied to the thread Curt Harness 56584 Question.You need one of these https://www.etrailer.com/Accessories-and-Parts/Pacer-Performance/PP20-702.html
-
Richard320 replied to the thread Changing Fuel Octane.It probably will only take one drive cycle to adjust the base timing. Which is in general terms, a cold start, warm up to operating...
-
Richard320 replied to the thread Replaced spark plugs, nothing but problems..I'd look for a cracked, plugged, or pinched line to the MAP sensor for that code. The pedal position sensor is probably the one that...